How to Clean Your Air Vents to Increase Efficiency

Many people ask me what they can do to reduce their energy bills for the comfort of their homes, or the heating or cooling unit. The most efficient method other than changing the air filter in your furnace is to clean the air vents.

It’s fairly easy and takes a minimum of time, and is certainly worth it. Here’s a brief “How To” to make it even simpler. Before you begin taking off all the grilles used for return and supply it is important to conduct an inspection of all the vents. It is important to look for air flow , and the vents can be found anyplace. They are usually in bookshelves behind couches, behind couches or cabinets beneath desks, and behind end tables. The majority of them might not be receiving airflow in any way, which is not dryer vent cleaning on your furnace. There must be at minimum three inches of clearance or space around the vents for air to flow in the manner it was intended as well. If it’s not, your furnace will be operating more efficiently and increasing the cost to run. If you’re forced to move your sofa just a few inches, I’d consider it.

Check your dampers to see if there are any. These are the small knobs on grilles that you can either open or shut. You can adjust them in the way you prefer or do not want air to flow. It’s not advised to keep several of them closed all over the home because it can cause the furnace to run less effectively. We are now getting ready to get the vents cleaned and ducts, we must decide whether we’d like to keep them in their current state. There are vents that may be old and rusty, while others might not function at all. It’s the right moment to swap your vents.

For a straightforward cleaning of your vents, you’ll need several things. Most of them in your home already. You’ll need an upright vacuum cleaner, preferably equipped with a crevice attachment some dish soap, something that doesn’t have any strong chemical smell and a duster, couple of rags, a sponge with a Phillip’s or a regular screw driver to remove the vent covers, and an old toothbrush if already have one.

Let’s now take off the covers using a screwdriver and put them aside towards the left. Look into the vent. You might be surprised by at what you can find the vent. It’s an excellent spot to find some disgusting objects. You could find hair from your pet as well as the hair of your pet, webs made by spiders, or many other dust particles.

Take the attachment to your vacuum crevice and begin sucking out the nasty dirt and dust. Be sure that the attachment is secured to ensure you don’t accidentally lose it inside your lungs. As much as you are able to. Go in with your duster and move it around to remove more dust. Vacuum again.

Now is the time to take your rag and make it damp using soap and water. Start wiping as long as you can get into the vents and the metal surrounding it. After you’ve finished we can move close to the covering. Clean it with a vacuum, then transport it to the sink if it is possible then give it a thorough clean using central vacuum cleaning. You can make use of an old sponge, and should you have one an old toothbrush can be used to get through the gaps between vents. If you have an older cover, it may not appear like new after cleaning it but it doesn’t really matter. It’s just a matter of making sure that the cover is clean and free of dust.

When the cover is dry then you can re-attach it and then clean another one. Every return vent and supply must be cleaned in exactly the same way. This process shouldn’t take too time and you’ll be thankful that you took the time to do it. Cleaner air means fresher air and it also smells better, particularly when you know that you’ll be saving money.